P3 Gauge Supported Vehicle Details

Browse P3 Gauge supported vehicles, installation PDF downloads, installation videos, OBD2 and CANbus data readings, vehicle-specific configuration settings, and compatibility notes.

P3 Gauge - Audi A1/S1 8X

View P3 Gauge - Audi A1/S1 8X Product Page

Supported Vehicles and Model Years

  • Audi A1 8X (2010-2018)
  • Audi S1 8X (2010-2018)

Product Description

Custom built multi-function digital boost gauge and more for the 8X generation (2010-2018) Audi A1 and S1, including 1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.6 TDI, 1.4 TDI, and S1 2.0 TFSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

P3 Gauge - Audi A3/S3/RS3 8P

View P3 Gauge - Audi A3/S3/RS3 8P Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A3 8P (2006-2013)
  • Audi S3 8P (2006-2013)
  • Audi RS3 8P (2006-2013)

Product Description

Custom built multi-function digital boost gauge and more for the 8P generation (2003-2013) Audi A3, S3, and RS3, including 1.6, 1.8 TFSI, 2.0 TFSI, 3.2 VR6, 1.6 TDI, 1.9 TDI, 2.0 TDI, S3 2.0 TFSI, and RS3 2.5 TFSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 - TSI/TFSI

Additional Fitment Notes

2005 model year is analog mode only and requires P3 analog boost sensor.

P3 Gauge - Audi A3/S3/RS3 8V

View P3 Gauge - Audi A3/S3/RS3 8V Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A3 8V (2013-2019)
  • Audi S3 8V (2013-2019)
  • Audi RS3 8V (2013-2019)

Product Description

Custom built multi-function digital boost gauge and more for the 8V generation (2013-2020) Audi A3, S3, and RS3, including 1.0 TFSI, 1.4 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI, S3 2.0 TFSI, and RS3 2.5 TFSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some non-US vehicles

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.C - OBD2 Charge Pipe Sensor

P3 Gauge - Audi A3/S3/RS3 8Y

View P3 Gauge - Audi A3/S3/RS3 8Y Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A3 8Y (2020+)
  • Audi S3 8Y (2020+)
  • Audi RS3 8Y (2020+)

Product Description

Custom built multi-function digital boost gauge and more for the 8Y generation (2022+) Audi A3, S3, and RS3, including 35 TFSI, 40 TFSI, 30 TDI, 35 TDI, S3 2.0 TFSI, and RS3 2.5 TFSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.H for 2025+

Boost Readings: (bSt.X)
bSt.5 - OBD2 MAP Sensor
bSt.C - OBD2 Charge Pipe Sensor

P3 Gauge - Audi A4/S4/RS4 B7

View P3 Gauge - Audi A4/S4/RS4 B7 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A4 B7 (2006-2008)
  • Audi S4 B7 (2006-2008)
  • Audi RS4 B7 (2006-2008)

Product Description

Custom built multi-function digital boost gauge and more for the B7 generation (2006-2008) Audi A4, S4, and RS4, including 1.6, 2.0 TFSI, 3.2 FSI, S4 4.2 FSI, RS4 4.2 FSI, 1.9 TDI, 2.0 TDI, and 3.0 TDI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - All Engines

P3 Gauge - Audi A4/S4/RS4/A5/S5/RS5 B8

View P3 Gauge - Audi A4/S4/RS4/A5/S5/RS5 B8 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A4 B8 (2008-2016)
  • Audi S4 B8 (2008-2016)
  • Audi RS4 B8 (2008-2016)
  • Audi A5 B8 (2008-2016)
  • Audi S5 B8 (2008-2016)
  • Audi RS5 B8 (2008-2016)

Product Description

Custom built multi-function digital boost gauge and more for the B8 generation (2008-2016) Audi A4, S4, RS4, A5, S5, and RS5, including 1.8 TFSI, 2.0 TFSI, 3.2 FSI, S4 3.0 TFSI, RS4 4.2 FSI, 2.0 TDI, 2.7 TDI, 3.0 TDI, S5 3.0 TFSI, S5 4.2 FSI, and RS5 4.2 FSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - 3.0t
bSt.1 - 2.0t

Additional Fitment Notes

Some vehicles require positioning of the control box to go below the vent and behind the dash trim because of lack of space, Many TDI tunes requires P3 Analog Boost Sensor for full boost readings.

P3 Gauge - Audi A4/S4/RS4/A5/S5/RS5 B9

View P3 Gauge - Audi A4/S4/RS4/A5/S5/RS5 B9 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A4 B9 (2016-2025)
  • Audi S4 B9 (2016-2025)
  • Audi RS4 B9 (2016-2025)
  • Audi A5 B9 (2016-2025)
  • Audi S5 B9 (2016-2025)
  • Audi RS5 B9 (2016-2025)

Product Description

Custom built multi-function digital boost gauge and more for the B9 generation (2017-2024) Audi A4, S4, RS4, A5, S5, and RS5, including 35 TFSI, 40 TFSI, 45 TFSI, S4 3.0 TFSI, RS4 2.9 TFSI, 35 TDI, 40 TDI, 45 TDI, S5 3.0 TFSI, and RS5 2.9 TFSI quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - 3.0t
bSt.1 - 2.0t

P3 Gauge - Audi A6 / S6 / RS6 C6

View P3 Gauge - Audi A6 / S6 / RS6 C6 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A6 C6 (2005-2011)
  • Audi S6 C6 (2005-2011)
  • Audi RS6 C6 (2005-2011)
  • Audi Allroad C6 (2005-2011)

Product Description

Custom built multi-function digital boost gauge and more for the C6 generation (2004-2011) Audi A6, S6, and RS6, including 2.0 TFSI, 3.0 TFSI, 4.2 FSI, 5.0 TFSI, 2.0 TDI, 2.7 TDI, 3.0 TDI, and all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - 3.0t
bSt.8 - RS6

P3 Gauge - Audi A6/S6/RS6/A7/S7/RS7 C7

View P3 Gauge - Audi A6/S6/RS6/A7/S7/RS7 C7 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi A6 C7 (2011-2018)
  • Audi S6 C7 (2011-2018)
  • Audi RS6 C7 (2011-2018)
  • Audi A7 C7 (2011-2018)
  • Audi S7 C7 (2011-2018)
  • Audi RS7 C7 (2011-2018)

Product Description

Custom built multi-function digital boost gauge and more for the C7 generation (2012-2018) Audi A6, S6, A7, S7, RS6, and RS7, including 2.0 TFSI, 3.0 TFSI, 4.0 TFSI, 2.0 TDI, 3.0 TDI, and all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - All Engines

P3 Gauge - Audi Q5 / SQ5 B8 Type 8R

View P3 Gauge - Audi Q5 / SQ5 B8 Type 8R Product Page

Supported Vehicles and Model Years

  • Audi Q5 B8 • MK1 8R (2008-2017)
  • Audi SQ5 B8 • MK1 8R (2008-2017)

Product Description

Custom built multi-function digital boost gauge and more for the Type 8R generation (2009-2017) B8 Audi Q5 and SQ5, including 2.0 TFSI, 3.2 FSI, 3.0 TFSI, SQ5 TFSI, 2.0 TDI, 3.0 TDI, SQ5 TDI, and all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - 3.0t
bSt.1 - 2.0t

P3 Gauge - Audi Q5 / SQ5 B9 Type 80A

View P3 Gauge - Audi Q5 / SQ5 B9 Type 80A Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi Q5 B9 • MK2 80A (2018-2025)
  • Audi SQ5 B9 • MK2 80A (2018-2025)

Product Description

Custom built multi-function digital boost gauge and more for the Type 80A generation (2018-2024) B9 Audi Q5 and SQ5, including 40 TFSI, 45 TFSI, 55 TFSI e, SQ5 TFSI, 35 TDI, 40 TDI, 45 TDI, and all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A
cc.Y hybrid models

Boost Readings: (bSt.X)
bSt.c - 3.0t/2.0t (Pre-Throttle Sensor)
bSt.d - 2.0t

P3 Gauge - Audi Q7 4L

View P3 Gauge - Audi Q7 4L Product Page

Supported Vehicles and Model Years

  • Audi Q7 4L (2005-2015)

Product Description

Custom built multi-function digital boost gauge and more for the 4L generation (2006-2015) Audi Q7, including 3.0 TFSI, 3.6 FSI, 4.2 FSI, 6.0 V12 TDI, 3.0 TDI, and 4.2 TDI models, as well as all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - 3.0t
bSt.0 - All Engines

P3 Gauge - Audi R8 MK1

View P3 Gauge - Audi R8 MK1 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi R8 MK1 - Type 42 (2006-2015)

Product Description

Custom built multi-function digital boost gauge and more for the Mk1 generation (2006-2015) Audi R8, including 4.2 FSI V8, 5.2 FSI V10, GT, GT Spyder, and all quattro variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.Y
LP.Y

Boost Readings: (bSt.X)
bSt.0 - All Engines

Additional Fitment Notes

Analog sensor required for boosted applications.

P3 Gauge - Audi TT/TTS/TTRS 8J

View P3 Gauge - Audi TT/TTS/TTRS 8J Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Audi TT 8J (2006-2014)
  • Audi TTS 8J (2006-2014)
  • Audi TTRS 8J (2006-2014)

Product Description

Custom built multi-function digital boost gauge and more for the 8J generation (2006-2014) Audi TT, TTS, and TT RS, including 1.8 TFSI, 2.0 TFSI, 3.2 VR6, TTS, and TT RS quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 - TSI/TFSI

P3 Gauge - Audi TT/TTS/TTRS 8S

View P3 Gauge - Audi TT/TTS/TTRS 8S Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Audi TT 8S (2015-2024)
  • Audi TTS 8S (2015-2024)
  • Audi TTRS 8S (2015-2024)

Product Description

Custom built multi-function digital boost gauge and more for the 8S generation (2016-2023) Audi TT, TTS, and TT RS, including 2.0 TFSI, 45 TFSI, TTS, and TT RS quattro models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some non-US vehicles

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.C - OBD2 Charge Pipe Sensor

P3 Gauge - BMW 1 / 2 Series F2X / F87

View P3 Gauge - BMW 1 / 2 Series F2X / F87 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 1 Series F2X (2011-2019) • 114 116 118 120 125 M135 M140
  • BMW 2 Series F2X (2011-2019) • 228 230 M235 M240
  • BMW M Models F87 (2016-2021) • M2
  • BMW 2 Series F87 (2016-2021) • M2

Product Description

Custom built multi-function digital boost gauge and more for the F20, F21, F22, F23, and F87 generation (2011-2019) BMW 1 Series and 2 Series, including 114i, 116i, 118i, 120i, 125i, M135i, M140i, 218i, 220i, 228i, 230i, M235i, M240i, and M2 models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor N20/N55/B58

P3 Gauge - BMW 1 Series E8X

View P3 Gauge - BMW 1 Series E8X Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 1 Series E8X (2008-2013) • 128 135 1M Coupe

Product Description

Custom built multi-function digital boost gauge and more for the E81, E82, E87, and E88 generation (2008–2013) BMW 1 Series, including 116i, 118i, 120i, 125i, 128i, 130i, 135i, 1 Series M Coupe (1M), 116d, 118d, 120d, and 123d models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.E

Boost Readings: (bSt.X)
bSt.d - Intake MAP Sensor for N55
bSt.E - Charge Pipe MAP Sensor

P3 Gauge - BMW 2 / 3 / 4 Series G2X/G8X/G42

View P3 Gauge - BMW 2 / 3 / 4 Series G2X/G8X/G42 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 2 Series G42 (2021-2024) • 230 M240
  • BMW 3 Series G2X (2019-2024) • 330 M340
  • BMW 4 Series G2X (2021-2024) • 430 M440
  • BMW M Models G8X (2020-2024) • M3 M4
  • BMW 3 Series G8X (2020-2024) • M3 M4
  • BMW 4 Series G8X (2020-2024) • M3 M4
  • BMW 2 Series G87 (2023+) • M2
  • BMW M Models G87 (2023+) • M2

Product Description

Custom built multi-function digital boost gauge and more for the G20, G21, G22, G23, G26, G42, G80, and G82 generation (2019-2024) BMW 2 Series, 3 Series, and 4 Series, including 218i, 220i, M240i, 318i, 320i, 330i, M340i, M3, 420i, 430i, M440i, and M4 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor B58/S58

Additional Fitment Notes

iDrive 8 install steps covered in second vehicle install video.

P3 Gauge - BMW 3 / 4 Series F3X/F8X

View P3 Gauge - BMW 3 / 4 Series F3X/F8X Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 3 Series F3X (2012-2019) • 320 328 330 335 340
  • BMW 4 Series F3X (2014-2019) • 428 430 435 440
  • BMW M Models F8X (2015-2019) • M3 M4
  • BMW 3 Series F8X (2015-2019) • M3 M4
  • BMW 4 Series F8X (2015-2019) • M3 M4

Product Description

Custom built multi-function digital boost gauge and more for the F30, F31, F32, F33, F34, F36, F80, and F82 generation (2012-2019) BMW 3 Series and 4 Series, including 316i, 318i, 320i, 328i, 330i, 335i, 340i, M3, 418i, 420i, 428i, 430i, 435i, 440i, and M4 models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F
cc.Y for N47 diesel

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor N20/N55/B58
bSt.C - Intake MAP Sensor N47 (diesel)

P3 Gauge - BMW 3 Series E9X

View P3 Gauge - BMW 3 Series E9X Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 3 Series E9X (2008-2013) • 325 328 330 335
  • BMW M Models E9X (2008-2013) • M3
  • BMW 3 Series E9X (2008-2013) • M3

Product Description

Custom built multi-function digital boost gauge and more for the E90, E91, E92, and E93 generation (2008-2013) BMW 3 Series, including 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, M3, 318d, 320d, 325d, 330d, and 335d models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.E

Boost Readings: (bSt.X)
bSt.d - Intake MAP Sensor for N55
bSt.E - Charge Pipe MAP Sensor

Additional Fitment Notes

2003-2007 model years are analog mode only and require P3 analog boost sensor. M3 does not show oil temp.

P3 Gauge - BMW 5 Series E60 / E61

View P3 Gauge - BMW 5 Series E60 / E61 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 5 Series E6X (2008-2010) • 528 535 545 550
  • BMW M Models E6X (2008-2010) • M5
  • BMW 5 Series E6X (2008-2010) • M5

Product Description

Custom built multi-function digital boost gauge and more for the E60 and E61 generation (2003-2010) BMW 5 Series, including 520i, 523i, 525i, 528i, 530i, 535i, 545i, 550i, M5, 520d, 525d, 530d, 535d, and all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.E

Boost Readings: (bSt.X)
bSt.d - Intake MAP Sensor for N55
bSt.E - Charge Pipe MAP Sensor

Additional Fitment Notes

2003-2007 model years are analog mode only and require P3 analog boost sensor.

P3 Gauge - BMW 5 Series F1X / F07

View P3 Gauge - BMW 5 Series F1X / F07 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • BMW 5 Series F1X (2011-2016) • 528 535 550
  • BMW 5 Series F07 (2010-2017) • 528GT 535GT 550GT
  • BMW M Models F1X (2011-2016) • M5
  • BMW 5 Series F1X (2011-2016) • M5

Product Description

Custom built multi-function digital boost gauge and more for the F10, F11, and F07 generation (2010-2017) BMW 5 Series, including 520i, 528i, 530i, 535i, 550i, M5, 518d, 520d, 525d, 530d, 535d, and 550d models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.E - Charge Pipe MAP Sensor
bSt.F - Intake MAP Sensor N20/N55/B58
bSt.8 -  Intake MAP Sensor for N63

P3 Gauge - BMW 5 Series G30/G31/F90

View P3 Gauge - BMW 5 Series G30/G31/F90 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • BMW 5 Series G30 (2017-2023) • 530 540 M550
  • BMW M Models F90 (2017-2023) • M5
  • BMW 5 Series F90 (2017-2023) • M5

Product Description

Custom built multi-function digital boost gauge and more for the G30, G31, and F90 generation (2017-2024) BMW 5 Series, including 520i, 530i, 540i, M550i, M5, 518d, 520d, 525d, 530d, 540d, and all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor B58

P3 Gauge - BMW 6 Series E63 / E64

View P3 Gauge - BMW 6 Series E63 / E64 Product Page

Supported Vehicles and Model Years

  • BMW 6 Series E6X (2008-2010) • 645 650
  • BMW M Models E6X (2008-2010) • M6
  • BMW 6 Series E6X (2008-2010) • M6

Product Description

Custom built multi-function digital boost gauge and more for the E63 and E64 generation (2008-2010) BMW 6 Series, including 630i, 645Ci, 650i, M6, 635d, and all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

P3 Gauge - BMW 6 Series F12/F13/F06

View P3 Gauge - BMW 6 Series F12/F13/F06 Product Page

Supported Vehicles and Model Years

  • BMW 6 Series F12/F13/F06 (2012-2018) • 640 650 640GC 650GC
  • BMW M Models F12/F13/F06 (2012-2018) • M6 M6GC
  • BMW 6 Series F12/F13/F06 (2012-2018) • M6 M6GC

Product Description

Custom built multi-function digital boost gauge and more for the F12, F13, and F06 generation (2011-2018) BMW 6 Series, including 640i, 650i, M6, 640d, and 650d models, as well as all xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor N55/B58
bSt.8 -  Intake MAP Sensor for N63

P3 Gauge - BMW X Series E70 / E71

View P3 Gauge - BMW X Series E70 / E71 Product Page

Supported Vehicles and Model Years

  • BMW X Series E7X (2008-2014) • X5 X6 X5M X6M

Product Description

Custom built multi-function digital boost gauge and more for the E70 and E71 generation (2007-2013) BMW X5 and X6, including X5 xDrive30i, xDrive35i, xDrive48i, xDrive50i, X5 M, X6 xDrive35i, xDrive50i, and X6 M models, as well as all diesel and xDrive variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.E
cc.Y - Diesel vehicles

Boost Readings: (bSt.X)
bSt.d - Intake MAP Sensor for N55
bSt.E - Charge Pipe MAP Sensor
bSt.C - Diesel Charge Pipe MAP Sensor

P3 Gauge - BMW X3 / X4 G01/G02/F97

View P3 Gauge - BMW X3 / X4 G01/G02/F97 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • BMW X Series G0X (2018-2024) • X3 X4
  • BMW M Models F9X (2018-2024) • X3M X4M
  • BMW X Series F9X (2018-2024) • X3M X4M

Product Description

Custom built multi-function digital boost gauge and more for the G01, G02, and F97 generation (2018-2024) BMW X3, X3 M40i, X3 M, X4, X4 M40i, and X4 M models.

SELECT COLOR / YEAR for LCI OR ADD VEHICLE YEAR TO NOTE IN CART 

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor B58/S58

P3 Gauge - BMW Z4 E89

View P3 Gauge - BMW Z4 E89 Product Page

Supported Vehicles and Model Years

  • BMW Z Series E89 (2009-2016) • Z4

Product Description

Custom built multi-function digital boost gauge and more for the E89 generation (2009-2016) BMW Z4, including sDrive18i, sDrive20i, sDrive23i, sDrive28i, sDrive30i, sDrive35i, and sDrive35is models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.E

Boost Readings: (bSt.X)
bSt.d - Intake MAP Sensor for N55
bSt.E - Charge Pipe MAP Sensor

P3 Gauge - Buick Regal / Opel Insignia (2009-2017)

View P3 Gauge - Buick Regal / Opel Insignia (2009-2017) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Buick Regal Gen 5 (2008-2017)
  • Opel Insignia Gen 5 (2008-2017)

Product Description

Custom built multi-function digital boost gauge and more for the 2009-2017 Buick Regal, Regal CXL, Regal GS, and Regal Turbo models, also known as the Opel Insignia and Vauxhall Insignia.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Cadillac ATS / ATS-V (2013-2019)

View P3 Gauge - Cadillac ATS / ATS-V (2013-2019) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Cadillac ATS 1st Gen / GM Alpha (2013–2019)
  • Cadillac ATS-V 1st Gen / GM Alpha (2013–2019)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the 2013-2019 Cadillac ATS, ATS Luxury, ATS Premium Luxury, ATS Premium Performance, ATS-V, and ATS-V Coupe models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.6 - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Cadillac CTS / CTS-V (2014-2019)

View P3 Gauge - Cadillac CTS / CTS-V (2014-2019) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Cadillac CTS 3rd Gen / GM Alpha (2014-2019)
  • Cadillac CTS-V 3rd Gen / GM Alpha (2014-2019)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the 2014-2019 Cadillac CTS, CTS Luxury, CTS Premium Luxury, CTS V-Sport, and CTS-V models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Chevrolet Camaro Gen 5

View P3 Gauge - Chevrolet Camaro Gen 5 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Chevrolet Camaro Gen 5 (2010-2015)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the Gen 5 (2010-2015) Chevrolet Camaro LS, LT, SS, ZL1, and all special edition models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Engine Oil Pressure
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Chevrolet Camaro Gen 6

View P3 Gauge - Chevrolet Camaro Gen 6 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Chevrolet Camaro Gen 6 (2016+)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the Gen 6 (2016-2024) Chevrolet Camaro LS, LT, LT1, SS, ZL1, and all special edition models.

In one sleek display you get real-time access to everything that matters - Boost, Ethanol % (if FlexFuel tuned), Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Engine Oil Pressure
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.6 - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Chevrolet Corvette C6

View P3 Gauge - Chevrolet Corvette C6 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Chevrolet Corvette C6 (2005-2013)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the C6 generation (2005-2013) Chevrolet Corvette Coupe, Convertible, Z06, Grand Sport, and ZR1 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Engine Oil Pressure
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Chevrolet Corvette C7

View P3 Gauge - Chevrolet Corvette C7 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Chevrolet Corvette C7 (2014-2019)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the C7 generation (2014-2019) Chevrolet Corvette Stingray, Z51, Grand Sport, Z06, and ZR1 models.

In one sleek display you get real-time access to everything that matters - Boost, Ethanol % (if FlexFuel tuned), Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Engine Oil Pressure
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.6 - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Chevrolet SS / Holden Commodore

View P3 Gauge - Chevrolet SS / Holden Commodore Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Chevrolet SS Sedan Gen 1 (2013-2017)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the 2014-2017 Chevrolet SS, also known as the Holden Commodore VF.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Ethanol Content Sensor (if equipped)
  • Coolant Temp
  • Engine Oil Pressure
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.L

Boost Readings: (bSt.X)
bSt.6 - OBD2 MAP Sensor

Additional Fitment Notes

Optional analog sensor is recommended for forced induction applications if the MAP sensor range is surpassed.

P3 Gauge - Dodge Challenger Gen 3

View P3 Gauge - Dodge Challenger Gen 3 Product Page

Supported Vehicles and Model Years

  • Dodge Challenger 3rd Gen / LC–LA–LB (2008–2023)
  • Dodge Challenger R/T 3rd Gen / LC–LA–LB (2008–2023)
  • Dodge Challenger Scat Pack 3rd Gen / LC–LA–LB (2008–2023)
  • Dodge Challenger SRT8 3rd Gen / LC–LA–LB (2008–2023)
  • Dodge Challenger Hellcat 3rd Gen / LC–LA–LB (2008–2023)
  • Dodge Challenger Demon 3rd Gen / LC–LA–LB (2008–2023)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 3 (2008-present) Dodge Challenger SXT, GT, R/T, Scat Pack, SRT 392, SRT Hellcat, and SRT Demon models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Dodge Charger Gen 7

View P3 Gauge - Dodge Charger Gen 7 Product Page

Supported Vehicles and Model Years

  • Dodge Charger 7th Gen / LD (2011–2023)
  • Dodge Charger R/T 7th Gen / LD (2011–2023)
  • Dodge Charger Scat Pack 7th Gen / LD (2011–2023)
  • Dodge Charger SRT8 7th Gen / LD (2011–2023)
  • Dodge Charger Hellcat 7th Gen / LD (2011–2023)
  • Dodge Charger Daytona 7th Gen / LD (2011–2023)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 7 (2011+) Dodge Charger SXT, GT, R/T, Scat Pack, SRT 392, and SRT Hellcat models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Dodge Ram Gen 4

View P3 Gauge - Dodge Ram Gen 4 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Dodge Ram (all models) 4th Gen / DS–DJ–D2 (2009–2019)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 4 (20011-2018) Dodge Ram 1500, 2500, and 3500 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.5 - Diesel Engines
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

FITS ALL FACELIFT 4TH GEN RAMS WITH VENT SHOWN IN PICTURE

P3 Gauge - Fiat 124 Spider

View P3 Gauge - Fiat 124 Spider Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Fiat 124 Spider 4th Gen / ND (2016–2020)

Product Description

Custom built multi-function digital boost gauge and more for the 2016-2020 Fiat 124 Spider Classica, Lusso, and Abarth models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Bronco (2021+)

View P3 Gauge - Ford Bronco (2021+) Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Ford Bronco 6th Gen / U725 (2021–present)

Product Description

Custom built multi-function digital boost gauge and more for the 2021+ Ford Bronco, Bronco Badlands, Bronco Outer Banks, Bronco Wildtrak, and Bronco Raptor models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Explorer (2020-2024)

View P3 Gauge - Ford Explorer (2020-2024) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford Explorer 6th Gen (2020–2024)
  • Ford Explorer ST 6th Gen (2020–2024)

Product Description

Custom built multi-function digital boost gauge and more for the 2020+ Ford Explorer, Explorer XLT, Explorer Limited, Explorer ST-Line, Explorer Timberline, Explorer ST, and Explorer Platinum models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Explorer (2025+)

View P3 Gauge - Ford Explorer (2025+) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford Explorer 7th Gen (2025+)
  • Ford Explorer ST 7th Gen (2025+)

Product Description

Custom built multi-function digital OBD2 boost gauge, ethanol content gauge, and much more for the 2025+ Ford Explorer, Explorer XLT, Explorer Limited, Explorer ST-Line, Explorer Timberline, Explorer ST, and Explorer Platinum models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford F-150 (2009-2014)

View P3 Gauge - Ford F-150 (2009-2014) Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Ford F-150 12th Gen (2009–2014)
  • Ford F-150 Raptor 12th Gen (2009–2014)

Product Description

Custom built multi-function digital boost gauge and more for the 2009-2014 Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, Limited, and SVT Raptor models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford F-150 (2015-2020)

View P3 Gauge - Ford F-150 (2015-2020) Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford F-150 13th Gen (2015–2020)
  • Ford F-150 Raptor 13th Gen (2015–2020)

Product Description

Custom built multi-function digital boost gauge and more for the 2015-2020 Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, Limited, and Raptor models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford F-150 (2021+)

View P3 Gauge - Ford F-150 (2021+) Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Ford F-150 14th Gen (2021–present)
  • Ford F-150 Raptor 14th Gen (2021–present)
  • Ford F-150 Lightning 14th Gen (2021–present)

Product Description

Custom built multi-function digital boost gauge and more for the 2021+ Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, and Raptor models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A
cc.Y - Powerboost Models

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

Powerboost models require a switched power source to keep gauge on when in electric mode.

P3 Gauge - Ford Fiesta Gen 7

View P3 Gauge - Ford Fiesta Gen 7 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford Fiesta 7th Gen (2017–2023)
  • Ford Fiesta ST 7th Gen (2017–2023)

Product Description

Custom built multi-function digital boost gauge and more for the 2011-2019 Ford Fiesta S, SE, Titanium, ST-Line, and ST models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Focus Gen 3

View P3 Gauge - Ford Focus Gen 3 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Ford Focus 3rd Gen (2011–2018)
  • Ford Focus ST 3rd Gen (2011–2018)
  • Ford Focus RS 3rd Gen (2011–2018)

Product Description

Custom built multi-function digital boost gauge and more for the 2011-2018 Ford Focus S, SE, Titanium, ST, and RS models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Mustang S197 / Gen 5

View P3 Gauge - Ford Mustang S197 / Gen 5 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford Mustang (all models) 5th Gen / S197 (2005–2014)
  • Ford Shelby GT500 5th Gen / S197 (2005–2014)

Product Description

Custom built multi-function digital boost gauge and more for the 2008-2014 S197 Ford Mustang V6, GT, Shelby GT500, Boss 302, and Bullitt models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Mustang S550 / Gen 6

View P3 Gauge - Ford Mustang S550 / Gen 6 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford Mustang (all models) 6th Gen / S550 (2015–2023)
  • Ford Shelby GT350 6th Gen / S550 (2015–2023)
  • Ford Shelby GT500 6th Gen / S550 (2015–2023)

Product Description

Custom built multi-function digital boost gauge and more for the 2015-2023 Gen 6 Ford Mustang S550 EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, and Bullitt models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Ford Super Duty Gen 2/3

View P3 Gauge - Ford Super Duty Gen 2/3 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Ford F-250 Super Duty 2nd Gen (2008–2010)
  • Ford F-250 Super Duty 3rd Gen (2011–2016)
  • Ford F-350 Super Duty 2nd Gen (2008–2010)
  • Ford F-350 Super Duty 3rd Gen (2011–2016)
  • Ford F-450 Super Duty 2nd Gen (2008–2010)
  • Ford F-450 Super Duty 3rd Gen (2011–2016)
  • Ford F-550 Super Duty 2nd Gen (2008–2010)
  • Ford F-550 Super Duty 3rd Gen (2011–2016)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 2 (2008-2010) and Gen 3 (2011-2022) Ford Super Duty F-250, F-350, and F-450 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.5 - Powerstroke

Additional Fitment Notes

Diesels must retain EGT1-1 or use analog EGT sensor

P3 Gauge - Ford Super Duty Gen 4

View P3 Gauge - Ford Super Duty Gen 4 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Ford F-250 Super Duty 4th Gen (2017–present)
  • Ford F-350 Super Duty 4th Gen (2017–present)
  • Ford F-450 Super Duty 4th Gen (2017–present)
  • Ford F-550 Super Duty 4th Gen (2017–present)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 4 (2023+) Ford Super Duty F-250, F-350, and F-450 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Transmission fluid temperature
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.5 - Powerstroke

Additional Fitment Notes

Diesels must retain EGT1-1 or use analog EGT sensor

P3 Gauge - Honda Accord 10th Gen

View P3 Gauge - Honda Accord 10th Gen Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Honda Accord 10th Gen (2017-2022)

Product Description

Custom built multi-function digital boost gauge and more for the 10th generation (2017-2022) Honda Accord LX, Sport, Sport Special Edition, EX, EX-L, and Touring models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.H

Boost Readings: (bSt.X)
bSt.c - OBD2 Charge Pipe Sensor

Additional Fitment Notes

NOT COMPATIBLE WITH HYBRID VEHICLES

P3 Gauge - Honda Civic 10th Gen

View P3 Gauge - Honda Civic 10th Gen Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Honda Civic Coupe 10th Gen (2016-2021)
  • Honda Civic Sedan 10th Gen (2016-2021)
  • Honda Civic Si Coupe 10th Gen (2016-2021)
  • Honda Civic Si Sedan 10th Gen (2016-2021)
  • Honda Civic Hatchback 10th Gen (2016-2021)
  • Honda Civic Type-R 10th Gen (2016-2021)

Product Description

Custom built multi-function digital boost gauge and more for the 10th generation (2016-2021) Honda Civic LX, Sport, EX, EX-L, Touring, Si, and Type R models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.H

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor (Type R Only)
bSt.c - OBD2 Charge Pipe Sensor

P3 Gauge - Honda Civic 11th Gen

View P3 Gauge - Honda Civic 11th Gen Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Honda Civic Sedan 11th Gen (2022+)
  • Honda Civic Hatchback 11th Gen (2022+)
  • Honda Civic Si Sedan 11th Gen (2022+)
  • Honda Civic Type-R 11th Gen (2022+)

Product Description

Custom built multi-function digital boost gauge and more for the 11th generation (2022+) Honda Civic LX, Sport, EX, Touring, Si, and Type R models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.H

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor (Type R Only)
bSt.c - OBD2 Charge Pipe Sensor

Additional Fitment Notes

Some Civics may require hardwired power to turn on and off automatically.

P3 Gauge - Hyundai Veloster 2nd Gen

View P3 Gauge - Hyundai Veloster 2nd Gen Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Hyundai Veloster 2nd Gen (2019-2022)
  • Hyundai Veloster Turbo 2nd Gen (2019-2022)
  • Hyundai Veloster Turbo R-Spec 2nd Gen (2019-2022)
  • Hyundai Veloster N 2nd Gen (2019-2022)

Product Description

Custom built multi-function digital boost gauge and more for the 2nd generation (2019-2022) Hyundai Veloster, Veloster Turbo, and Veloster N models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Jeep Grand Cherokee Gen 4

View P3 Gauge - Jeep Grand Cherokee Gen 4 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • JEEP Grand Cherokee 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee Laredo 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee Limited 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee Overland 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee Summit 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee SRT 4th Gen / WK2 (2011–2021)
  • JEEP Grand Cherokee Trackhawk 4th Gen / WK2 (2011–2021)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 4 (2011-2021) Jeep Grand Cherokee models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Jeep Wrangler / Gladiator JK/JL/JT

View P3 Gauge - Jeep Wrangler / Gladiator JK/JL/JT Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • JEEP Wrangler Wrangler JK – 3rd Gen (2007–2018)
  • JEEP Wrangler Wrangler JL – 4th Gen (2018–present)
  • JEEP Wrangler Gladiator JT – 1st Gen (2020–present)
  • JEEP Gladiator Wrangler JK – 3rd Gen (2007–2018)
  • JEEP Gladiator Wrangler JL – 4th Gen (2018–present)
  • JEEP Gladiator Gladiator JT – 1st Gen (2020–present)

Product Description

Custom built multi-function digital boost gauge and more for the JK (2007–2018) and JL (2018-present) Jeep Wrangler, and JT (2020-present) Jeep Gladiator models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

FITS WRANGLER AND GLADIATOR

P3 Gauge - Mazda MX-5/Miata ND

View P3 Gauge - Mazda MX-5/Miata ND Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Mazda MX-5 4th Gen / ND (2016–present)
  • Mazda Miata 4th Gen / ND (2016–present)

Product Description

Custom built multi-function digital boost gauge and more for the ND generation (2016+) Mazda MX-5 Miata Sport, Club, and Grand Touring models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Mercedes C Class W205

View P3 Gauge - Mercedes C Class W205 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Mercedes-Benz C200 W205 C-Class (2015-2019)
  • Mercedes-Benz C300 W205 C-Class (2015-2019)
  • Mercedes-Benz C400 W205 C-Class (2015-2019)
  • Mercedes-Benz C450 W205 C-Class (2015-2019)
  • Mercedes-Benz C43 AMG W205 C-Class (2015-2019)
  • Mercedes-Benz C63 AMG W205 C-Class (2015-2019)
  • Mercedes-Benz C63 AMG S W205 C-Class (2015-2019)

Product Description

Custom built multi-function digital boost gauge and more for the W205 generation (2015-2021) Mercedes-Benz C-Class, including C 300, C 350e, AMG C 43, AMG C 63, and AMG C 63 S models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some vehicles

Boost Readings: (bSt.X)
bSt.5 - Charge Pipe Boost via OBD2 Port

P3 Gauge - Mercedes CLA/GLA/A Class

View P3 Gauge - Mercedes CLA/GLA/A Class Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Mercedes-Benz A250 W176 A-Class (2012-2018)
  • Mercedes-Benz A45 AMG W176 A-Class (2012-2018)
  • Mercedes-Benz CLA250 W176 A-Class (2012-2018)
  • Mercedes-Benz CLA45 AMG W176 A-Class (2012-2018)
  • Mercedes-Benz GLA250 W176 A-Class (2012-2018)
  • Mercedes-Benz GLA45 AMG W176 A-Class (2012-2018)

Product Description

Custom built multi-function digital boost gauge and more for the 2014-2019 Mercedes-Benz CLA-Class, GLA-Class, and A-Class, including CLA 250, AMG CLA 45, GLA 250, AMG GLA 45, A 220, and AMG A 45 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some non-US vehicles

Additional Fitment Notes

Compatible with A Class, CLA Class, and GLA Class vehicles. May cause interference with Mercedes Me Connect

P3 Gauge - Mini Cooper F55/F56/F57

View P3 Gauge - Mini Cooper F55/F56/F57 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • MINI Cooper Hatchback F55/F56/F57 (2014-2024)
  • MINI Cooper Hatchback S F55/F56/F57 (2014-2024)
  • MINI Cooper Hatchback JCW F55/F56/F57 (2014-2024)
  • MINI Cooper Hatchback JCW GP F55/F56/F57 (2014-2024)
  • MINI Cooper Convertible F55/F56/F57 (2014-2024)
  • MINI Cooper Convertible S F55/F56/F57 (2014-2024)
  • MINI Cooper Convertible JCW F55/F56/F57 (2014-2024)

Product Description

Custom built multi-function digital boost gauge and more for the F55, F56, and F57 generation (2014-2024) Mini Cooper, Cooper S, John Cooper Works, and special edition models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A
cc.F - Alternate setting for some 2.0 vehicles

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.c - OBD2 Charge Pipe Sensor

P3 Gauge - Mini Cooper R55/R56/R57/R58/R59

View P3 Gauge - Mini Cooper R55/R56/R57/R58/R59 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • MINI Cooper Clubman R55-R59 (2007-2015)
  • MINI Cooper Clubman S R55-R59 (2007-2015)
  • MINI Cooper Clubman JCW R55-R59 (2007-2015)
  • MINI Cooper Convertible R55-R59 (2007-2015)
  • MINI Cooper Convertible S R55-R59 (2007-2015)
  • MINI Cooper Convertible JCW R55-R59 (2007-2015)
  • MINI Cooper Coupe R55-R59 (2007-2015)
  • MINI Cooper Coupe S R55-R59 (2007-2015)
  • MINI Cooper Coupe JCW R55-R59 (2007-2015)
  • MINI Cooper Hatchback R55-R59 (2007-2015)
  • MINI Cooper Hatchback S R55-R59 (2007-2015)
  • MINI Cooper Hatchback JCW R55-R59 (2007-2015)
  • MINI Cooper Hatchback JCW GP R55-R59 (2007-2015)
  • MINI Cooper Roadster R55-R59 (2007-2015)
  • MINI Cooper Roadster S R55-R59 (2007-2015)
  • MINI Cooper Roadster JCW R55-R59 (2007-2015)

Product Description

Custom built multi-function digital boost gauge and more for the R55 through R59 generation (2008-2015) Mini Cooper Clubman, Convertible, Coupe, and Roadster, including Cooper, Cooper S, and John Cooper Works models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor
bSt.c - OBD2 Charge Pipe Sensor

P3 Gauge - Mini Cooper R60/R61

View P3 Gauge - Mini Cooper R60/R61 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • MINI Cooper Countryman R60/R61 (2010-2016)
  • MINI Cooper Countryman S R60/R61 (2010-2016)
  • MINI Cooper Countryman S ALL4 R60/R61 (2010-2016)
  • MINI Cooper Countryman JCW R60/R61 (2010-2016)
  • MINI Cooper Paceman R60/R61 (2010-2016)
  • MINI Cooper Paceman S R60/R61 (2010-2016)
  • MINI Cooper Paceman S ALL4 R60/R61 (2010-2016)
  • MINI Cooper Paceman JCW R60/R61 (2010-2016)

Product Description

Custom built multi-function digital boost gauge and more for the R60 and R61 generation (2011-2016) Mini Cooper Countryman and Paceman, including Cooper, Cooper S, Cooper S ALL4, and John Cooper Works models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Mitsubishi Lancer / EVO X

View P3 Gauge - Mitsubishi Lancer / EVO X Product Page

Supported Vehicles and Model Years

  • Mitsubishi Lancer CJ Chassis (2007-2017)
  • Mitsubishi Lancer ES CJ Chassis (2007-2017)
  • Mitsubishi Lancer SE CJ Chassis (2007-2017)
  • Mitsubishi Lancer GTS CJ Chassis (2007-2017)
  • Mitsubishi Lancer EVO X CJ Chassis (2007-2017)
  • Mitsubishi Lancer Sportback CJ Chassis (2007-2017)

Product Description

Custom built multi-function digital boost gauge and more for the 10th gen EVO and CJ Chassis (2007-2017) Mitsubishi Lancer ES, SE, GTS, Ralliart, and Evo X models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Porsche 911 991

View P3 Gauge - Porsche 911 991 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Porsche 911 Carrera 991 (2012–2019)
  • Porsche 911 Turbo 991 (2012–2019)
  • Porsche 911 GT3 991 (2012–2019)
  • Porsche 911 GT2 991 (2012–2019)
  • Porsche 911 Targa 991 (2012–2019)

Product Description

Custom built multi-function digital boost gauge and more for the 991 generation (2012-2019) Porsche 911 Carrera, Carrera S, Carrera 4, Carrera 4S, Targa, GTS, Turbo, Turbo S, and GT3 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d- Boost from OEM MAP sensor

P3 Gauge - Porsche Cayenne Gen 1

View P3 Gauge - Porsche Cayenne Gen 1 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Porsche Cayenne 1st Gen 957 (2007–2010)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 1 (2008-2010) Porsche Cayenne, Cayenne S, Cayenne GTS, Cayenne Turbo, and Cayenne Turbo S models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Additional Fitment Notes

2003-2007 operates in analog mode only, OBD2 (canbus) requires 2008+

P3 Gauge - Seat Leon Mk2

View P3 Gauge - Seat Leon Mk2 Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • SEAT Leon MK2 (Typ 1P 2005–2012)

Product Description

Custom built multi-function digital boost gauge and more for the Mk2 (2005-2012) SEAT Leon Reference, Stylance, Sport, FR, and Cupra models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A (2008+)

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 -  TSI, TFSI

Additional Fitment Notes

TDI and 2005/2006 models are analog mode only and require P3 analog boost sensor.

P3 Gauge - Subaru BRZ/Toyota GR86 Gen 2

View P3 Gauge - Subaru BRZ/Toyota GR86 Gen 2 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Subaru BRZ 2nd Gen (2022–present)
  • Toyota 86 / GT86 / GR86 2nd Gen (2022–present)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 2 (2022+) Subaru BRZ and Toyota GR86 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Subaru BRZ/Toyota GT86/Scion FRS Gen 1

View P3 Gauge - Subaru BRZ/Toyota GT86/Scion FRS Gen 1 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Toyota 86 / GT86 / GR86 1st Gen (2012–2020)
  • Toyota FR-S 1st Gen (2012–2020)
  • Subaru BRZ 1st Gen (2012–2020)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 1 (2013-2021) Subaru BRZ, Toyota FT86/86, and Scion FR-S models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.Y (2013-2016)
cc.A (2017+)

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

Additional Fitment Notes

MAP sensor reads up to 5 PSI
We recommend optional analog sensor for turbo or supercharged vehicles because of factory MAP limitations.

P3 Gauge - Subaru Impreza/WRX/STI/Forester Gen 3

View P3 Gauge - Subaru Impreza/WRX/STI/Forester Gen 3 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Subaru Impreza 3rd Gen (2008–2014)
  • Subaru WRX 3rd Gen (2008–2014)
  • Subaru WRX STI 3rd Gen (2008–2014)
  • Subaru Forester 3rd Gen (2008–2014)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 3 (2008-2011) Subaru Impreza, WRX, WRX STI, and Forester models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Subaru Impreza/WRX/STI/Forester Gen 4

View P3 Gauge - Subaru Impreza/WRX/STI/Forester Gen 4 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Subaru Impreza 4th Gen (2015–2021)
  • Subaru WRX 4th Gen (2015–2021)
  • Subaru WRX STI 4th Gen (2015–2021)
  • Subaru Forester 4th Gen (2015–2021)

Product Description

Custom built multi-function digital boost gauge and more for the Gen 4 (2012-2016) Subaru Impreza, WRX, WRX STI, and Forester models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.d - OBD2 MAP Sensor

P3 Gauge - Toyota Supra A90/A91 5th Gen

View P3 Gauge - Toyota Supra A90/A91 5th Gen Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Toyota Supra 5th Gen / A90+A91 (2019–present)

Product Description

Custom built multi-function digital boost gauge and more for the A90 / A91 generation (2019+) Toyota Supra 2.0, 3.0, and 3.0 Premium models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.F

Boost Readings: (bSt.X)
bSt.F - Intake MAP Sensor B58

P3 Gauge - VW Beetle A5

View P3 Gauge - VW Beetle A5 Product Page

Supported Vehicles and Model Years

  • Volkswagen Beetle A5 (2011-2019)

Product Description

Custom built multi-function digital boost gauge and more for the A5 generation (2012-2019) Volkswagen Beetle, including Beetle 1.2 TSI, 1.4 TSI, 2.0 TSI, R-Line, Dune, GSR, and all TDI variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some non-US vehicles

Boost Readings: (bSt.X)
bSt.c - Digital Boost From Charge Pipe
bSt.d - Digital boost from MAP Sensor
bSt.C - TDI

P3 Gauge - VW CC / Passat B6

View P3 Gauge - VW CC / Passat B6 Product Page

Supported Vehicles and Model Years

  • Volkswagen Passat B6 CC (2007-2017)
  • Volkswagen Passat B6 (2005-2010)
  • Volkswagen CC B6 CC (2007-2017)
  • Volkswagen CC B6 (2005-2010)

Product Description

Custom built multi-function digital boost gauge and more for the Volkswagen CC and Passat B6 generation (2007-2017), including Trendline, Comfortline, Highline, R-Line, and all TSI, FSI, and TDI 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 -  TSI, TFSI

Additional Fitment Notes

TDI models are analog mode only and require P3 analog boost sensor.

P3 Gauge - VW Golf / GTI / Golf R MK7

View P3 Gauge - VW Golf / GTI / Golf R MK7 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Golf MK7 / MK7.5 (2014-2020)
  • Volkswagen GTI MK7 / MK7.5 (2014-2020)
  • Volkswagen Alltrack MK7 / MK7.5 (2014-2020)
  • Volkswagen Golf R MK7 / MK7.5 (2014-2020)

Product Description

Custom built multi-function digital boost gauge and more for the Mk7 and Mk7.5 generation (2014-2020) Volkswagen Golf, GTI, and Golf R, including Golf TSI, Golf TDI, GTI S, GTI SE, GTI Autobahn, Golf R 2.0 TFSI, e-Golf, and all 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y required for some non-US vehicles

Boost Readings: (bSt.X)
bSt.d - Digital Boost From MAP Sensor
bSt.c - Digital Boost From Charge Pipe / TDI

Additional Fitment Notes

Oil Temp via OBD2 on GTI and Golf R models only.

P3 Gauge - VW Golf / GTI / JSW / Golf R MK6

View P3 Gauge - VW Golf / GTI / JSW / Golf R MK6 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Golf MK6 (2009-2014)
  • Volkswagen GTI MK6 (2009-2014)
  • Volkswagen Jetta Sportwagen MK6 (2009-2014)
  • Volkswagen Golf R MK6 (2009-2014)

Product Description

Custom built multi-function digital boost gauge and more for the Mk6 generation (2010-2014) Volkswagen Golf, GTI, and Golf R, including Golf TSI, Golf TDI, GTI 2.0 TFSI, and Golf R 2.0 TFSI models, as well as all 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - Golf R
bSt.1 - TFSI

Additional Fitment Notes

TDI's must be 2013+ to be compatible with all readings.

P3 Gauge - VW Golf / GTI MK8

View P3 Gauge - VW Golf / GTI MK8 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Golf MK8 (2020+)
  • Volkswagen GTI MK8 (2020+)
  • Volkswagen Golf R MK8 (2020+)

Product Description

Custom built multi-function digital boost gauge and more for the Mk8 generation (2020+) Volkswagen Golf and GTI, including Golf TSI, Golf R, GTI S, GTI SE, GTI Autobahn, and all 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Engine Oil Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.H for 2025+

Boost Readings: (bSt.X)
bSt.c - Digital Boost From Charge Pipe
bSt.5 - Digital Boost From MAP Sensor

P3 Gauge - VW Golf / Jetta / GTI / GLI / R32 MK5

View P3 Gauge - VW Golf / Jetta / GTI / GLI / R32 MK5 Product Page

Installation PDF Downloads

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Golf MK5 (2007-2009)
  • Volkswagen GTI MK5 (2007-2009)
  • Volkswagen Jetta MK5 (2007-2009)
  • Volkswagen Jetta GLI MK5 (2007-2009)
  • Volkswagen R32 MK5 (2008)

Product Description

Custom built multi-function digital boost gauge and more for the Mk5 generation (2007-2009) Volkswagen Golf, GTI, Jetta, GLI, and R32, including Golf TSI, Golf TDI, GTI 2.0 TFSI, Jetta 2.0 TFSI, GLI 2.0 TFSI, and R32 3.2 VR6 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A 

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 - TSI/R32 / NA Models

Additional Fitment Notes

* TDI (diesel fuel) and 2005 models have limited obd2 readings, must use analog sensors for boost.

P3 Gauge - VW Jetta / GLI MK6

View P3 Gauge - VW Jetta / GLI MK6 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Jetta MK6 (2011-2018)
  • Volkswagen Jetta GLI MK6 (2011-2018)

Product Description

Custom built multi-function digital boost gauge and more for the Mk6 generation (2011-2018) Volkswagen Jetta, including S, SE, SEL, GLI, Hybrid, and all TSI and TDI variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A 

Boost Readings: (bSt.X)
bSt.d - Digital Boost From MAP Sensor
bSt.0 - 2011-2013 FSI
bSt.1 - 2011-2013 TSI, GLI
bSt.C - 2014-2018 TDI

Additional Fitment Notes

*2011-2013 TDI provides limited data over OBD, requires analog sensor for boost.

P3 Gauge - VW Jetta / GLI MK7

View P3 Gauge - VW Jetta / GLI MK7 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Jetta MK7 (2019-2024)
  • Volkswagen Jetta GLI MK7 (2019-2024)

Product Description

Custom built multi-function digital boost gauge and more for the Mk7 generation (2019-2024) Volkswagen Jetta, including S, SE, R-Line, SEL, SEL Premium, GLI S, GLI Autobahn, and all TSI variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A default setting
cc.Y for some non-US vehicles

Boost Readings: (bSt.X)
bSt.d - Digital Boost From MAP Sensor
bSt.c - Digital Boost From Charge Pipe (or TDI)

Additional Fitment Notes

Install requires relocating the vent controller slat to the bottom, you can view the process in the second video.
Does not fit 2025+ model with chrome vent accents.

P3 Gauge - VW Passat B7

View P3 Gauge - VW Passat B7 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Passat B7 (2010-2015)

Product Description

Custom built multi-function digital boost gauge and more for the B7 generation (2010-2015) Volkswagen Passat, including S, SE, SEL, R-Line, Alltrack, and all TSI and TDI 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c - Digital Boost From Charge Pipe
bSt.d - Digital boost from MAP Sensor
bSt.C - TDI

Additional Fitment Notes

For North American market only.

P3 Gauge - VW Passat B8

View P3 Gauge - VW Passat B8 Product Page

Supported Vehicles and Model Years

  • Volkswagen Passat B8 (2015-2019)

Product Description

Custom built multi-function digital boost gauge and more for the B8 generation (2015+) Volkswagen Passat, including S, SE, R-Line, SEL Premium, GTE, Alltrack, and all TSI and TDI 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

P3 Gauge - VW Polo / GTI / TDI

View P3 Gauge - VW Polo / GTI / TDI Product Page

Installation PDF Downloads

Supported Vehicles and Model Years

  • Volkswagen Polo MK5 (2009-2018)
  • Volkswagen Polo GTI MK5 (2009-2018)
  • Volkswagen Polo TDI MK5 (2009-2018)
  • Volkswagen Polo R MK5 (2009-2018)

Product Description

Custom built multi-function digital boost gauge and more for the Volkswagen Polo (2009-2017), including Polo Trendline, Comfortline, Highline, Polo GTI 1.4 TSI and 1.8 TSI, Polo R WRC 2.0 TSI, as well as Polo TDI 1.2, 1.4, and 1.6 models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.Y

Boost Readings: (bSt.X)
bSt.c - Digital Boost From Charge Pipe
bSt.d - Digital boost from MAP Sensor
bSt.C - TDI

P3 Gauge - VW Scirocco / EOS

View P3 Gauge - VW Scirocco / EOS Product Page

Supported Vehicles and Model Years

  • Volkswagen EOS Gen 3 (2007-2017)
  • Volkswagen Scirocco Gen 3 (2007-2017)
  • Volkswagen Scirocco R Gen 3 (2007-2017)

Product Description

Custom built multi-function digital boost gauge and more for the Volkswagen Scirocco (2008-2017) and Volkswagen Eos (2006–2015), including Scirocco TSI, Scirocco R, Scirocco TDI, Eos TSI, and Eos TDI models.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 -  TSI, TFSI

Additional Fitment Notes

**NOTE** Does NOT fit Facelift Scirocco models
TDI models are analog mode only and require P3 analog boost sensor.

P3 Gauge - VW Tiguan MK1

View P3 Gauge - VW Tiguan MK1 Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Tiguan MK1 (2007-2015)

Product Description

Custom built multi-function digital boost gauge and more for the Mk1 generation (2007-2017) Volkswagen Tiguan, including Trend & Fun, Sport & Style, Track & Field, R-Line, and all TSI and TDI 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.0 - FSI
bSt.1 -  TSI, TFSI

Additional Fitment Notes

TDI models are analog mode only and require P3 analog boost sensor.

P3 Gauge - VW Tiguan MQB

View P3 Gauge - VW Tiguan MQB Product Page

Installation and Setup Videos

Supported Vehicles and Model Years

  • Volkswagen Tiguan MQB (2017-2024)

Product Description

Custom built multi-function digital boost gauge and more for the MQB-based Volkswagen Tiguan (2016+), including Tiguan S, SE, SEL, SEL Premium, R-Line, Tiguan Allspace, and all 4MOTION variants, as well as models with TSI and TDI engines.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Vehicle Specific Config Settings

Car Config Setting (cc.X)
cc.A

Boost Readings: (bSt.X)
bSt.c

P3 Gauge - VW Touareg

View P3 Gauge - VW Touareg Product Page

Supported Vehicles and Model Years

  • Volkswagen Touareg MK3 (2010-2017)

Product Description

Custom built multi-function digital boost gauge and more for the Mk2 generation (2010-2018) Volkswagen Touareg, including 3.6 FSI, 4.2 FSI, 3.0 TDI, 4.2 V8 TDI, Hybrid, R-Line, and all 4MOTION variants.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

OBD Port Data (CANbus Input)

  • Boost Pressure
  • Coolant Temp
  • Air/Fuel Ratio (AFR or Lambda)
  • Vehicle Speed (Calibrated or Raw)
  • Intake Air Temp
  • Throttle Angle
  • Ignition Timing
  • Engine RPM (with shiftlight)
  • EGT (Exhaust Gas Temp)
  • Battery Volts
  • Acceration timers (0-60, 0-100, 60-130)
  • Braking timers (60-0, 100-0)
  • Read and clear DTC (Trouble Codes)

Frequently Asked Questions

  • Can the P3 Gauge display both English and Metric units?

    Yes. You can configure units to English, Metric, or a mix of both, with selections for PSI/inHg, BAR, Celsius, Fahrenheit, MPH and KPH.

  • Can the P3 Gauge handle extreme temperatures?

    Yes. We have torture-tested our gauges from well below freezing to extreme heat well beyond typical in-car conditions, including scenarios hot enough to soften or melt plastics, and they continued to function without failure.

  • Do I need the optional sensors?

    In most vehicles, no additional sensors are required for all the supported modes. Certain readings that are not provided by the ECU, aftermarket kits like superchargers, turbochargers or ethanol may require our optional analog sensor/adapter kit, depending on the data you want to monitor.

  • Do I need to buy anything extra or is it Plug and Play?

    The P3 Gauge comes with everything you need. The optional tools and add-ons we offer are for those looking for extras or to go beyond the standard readings listed in the "Gauge Modes / Readings" section on the produce page.

  • How accurate is the P3 Gauge and it's sensor readings?

    The P3 Gauge displays real-time true data from your ECU's sensor readings. Many times these readings will be more accurate than your cars dashboard which often shows "dummy" or "soft" values. An optional analog sensor can be added for certain data types to ensure maximum accuracy.

  • How does the P3 Gauge get data from my car's existing sensors?

    It plugs into the OBD2 port and acts as a diagnostics reader. If you want to keep that port free, a hard-wire harness kit is available.

  • How hard is it to install a P3 Gauge and how long does it take?

    Most installs take 5–30 minutes, depending on your skill level and vehicle.

  • What if I want to use the OBD port for other things?

    You can unplug the gauge at any time, it keeps it's settings. We also offer an OBD2 splitter, as well as a hardwire kit. If you want to use another device along with the P3 Gauge, it is best to leave the gauge in ConF mode, as in this mode it will not talk on the vehicle network, or interfere with other devices.

  • Will installing a P3 Gauge void my vehicle warranty?

    No. Using a P3 Gauge is the same as plugging in an OBD2 scan tool. Under the Magnuson-Moss Warranty Act (15 U.S.C. § 2301 et seq.) and Right-to-Repair principles, you have the right to use your own diagnostic tools through the OBD2 port. A manufacturer cannot void or deny warranty coverage just because an aftermarket tool or gauge was connected.

  • Will installing it in the vent affect heating or A/C?

    The P3 Gauge is engineered to retain airflow through your vent, so heating and A/C performance are not affected. Each gauge is designed for its specific vehicle to ensure minimal compromise.

  • Will modifications or tuning affect my readings?

    Standard modifications and ECU reflashes typically do not affect accuracy. Only piggy-back tuning that alters sensor data may require an optional analog sensor.

Optional Add-Ons

P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
P3 0-150 PSI Pressure Sensor - Keep an eye on those pressures with our simple analog pressure sensor. Is a 5 volt powered sensor